Installation of arrestors or other items in entry panel boxes, includes hardware. (Arrestors only).
Price: $9/unit, any brand or model. Increase quantity after adding to cart.
90˚ mounting bracket for M-348 units, rotates unit so terminal strip is facing up. Makes wiring duties much easier; with hardware.
Price: $9
Medium 14” tall, x 12” wide, x 6” deep FRP box, includes copper sheet. Gray finish. Add number of grommets in accessories below. Copper sheet measures 12.5” tall x 11” wide. Comes with two stainless steel latches that are padlock-able.
14”x12”x6” FRP box.
$225
Click to enlarge.
Concrete mounting fixture for entry panel.
Click pic for more info.
Terminal strip for rotor/control wire connections, 8 double terminals.
Price: $5.50
Copper wire lug for ground wire, 4-14 gauge, and 2-14 gauge.
4-14 ga., Price: $4.50
2-14 ga., Price: $5.25
Package of 25 self drilling sheet metal screws for mounting Morgan arrestors to copper or aluminum sheet.
Price: $4
Tinned copper ground braid, 1/2” wide and 3/4” wide. (Specify number of feet after adding to cart).
1/2”, Price: $1.10/ft.
3/4” Price: $2.25/ft.
Copper split bolt for connecting two 4 gauge copper ground wires.
Price: $4.00
Conduit install kit for entrance panel, comes with inside bushing, locknut, male adaptor and 12” of 1.5”, 2’, or 3” ID PVC conduit. Requires cutting conduit and terminating on the indoor side.
1.5” kit, Price: $14.50
2” kit, Price: $17.50
3” kit, Price: $24.50
Penetrox-A anti-oxidant connection grease. For all aluminum to aluminum and aluminum to copper connections. Prevents oxidation, corrosion and improves conductivity between arrestors and copper (or aluminum) sheet. Also great for antenna element construction.
2 oz., Price: $8.45
8 oz., Price: $20.95
For Morgan Mfg. lightning arrestors, go to our Morgan Mfg. products page.
For Alpha Delta lightning arrestors, go to our Alpha Delta products page.
Master Lock, brass lock with keys to keep nosy kids out of your entry panels. Fits on medium box above only!
Price: $9.45
GUARDIAN Series™ waterproof boxes
Our FRP fiberglass boxes are perfect for protecting equipment and wiring in harsh environments. The GUARDIAN Series™ boxes are made from fiberglass reinforced polyester with a UL94-5V flame rating, continuous stainless steel hinge, and come with either a removable plastic key or stainless latches (depending on size/model). Boxes are customized to your specific needs, and can be built as a wall mounted entry panel, or a tower/post mounted junction box. All sizes/models are waterproof and have a gasketed lid.
Common, included features of all Guardian Series™ entry panel boxes:
-
• Made from fiberglass reinforced polyester (FRP) that is extremely durable and non-conductive. Impervious to salt spray.
Light gray finish; can be painted by purchaser before installation.
-
•Lockable latch (padlocks available below), OR removable plastic key.
-
•Gasketed lid.
-
•Copper mounting sheet.
-
•Grommet holes on bottom for cables; extra holes can be plugged for future use.
-
•Larger cutouts for conduit in bottom or back also possible. There are NO slots in bottom for flat grounding strap in fiberglass boxes.
To order:
1) Choose box size below. Adhere to notes below as to how many arrestors can fit in each size,
and click “add to cart”.
2) Pick out “Optional Accessories” below, including grommets and plugs. These do NOT come with
the box; all accessories are a la carte.
3) Let me know of any additional requirements; send me an email. I will correspond with you before
starting. Thanks!
Medium FRP boxes can hold:
1 Morgan rotator units, plus:
3 Morgan arrestors, or
7 Alpha Delta arrestors, or
6 Polyphaser arrestors.
Recommended conduit size: 2”
M
Rubber grommets for cable entry into boxes. FITS PL-259 and N CONNECTORS! Specify quantity after adding to cart.
Price: $.75/ea
Plastic plugs to seal unused holes. Specify quantity after adding to cart.
Price: $.50/ea
Self adhesive weatherstripping for sealing box to wall of home. (Size specific.)
Small box: $4.50
Medium box: $6.50
Large box: $7.50
Extra large box: $8.95
For Polyphaser. lightning arrestors, go to our Polyphaser. products page.
We also stock and install POLYPHASER, ALPHA DELTA and MORGAN MANUFACTURING surge protectors in our boxes! Arrestors can be pre-installed for a small charge; see “Optional Accessories” below to select this option.
Strut channel for junction boxes, entry panels, plus clamps and accessories can be found here, see link below.
How to order video, must watch before ordering!
Small and Large models come with removable plastic key which prevents lid from being opened.
Medium boxes come with stainless lockable latches. All boxes are customized with grommet holes and/or cutouts for conduit.
This small box (12”x10”x6”) is set up as a wall mounted entry panel. 6 grommet holes bottom for cables entering box, and a cut out for 1.5” conduit in the back upper left corner for cables exiting the box.
This medium box (14”x12”x6”) is set up as a junction box where all cables enter and exit the bottom through grommets. Copper sheet is easily removed by unscrewing four stainless nuts.
Medium FRP box set up as a junction box with cables coming in/out the bottom, with surge protection for a remote coax switch. Morgan arrestors installed for HF and VHF/UHF.
Small 12” tall, x 10” wide, x 6” deep FRP box, includes copper sheet. Gray finish. Add number of grommets in accessories below. Copper sheet measures 10.5” tall x 9” wide. Comes with removable plastic key latch.
12”x10”x6” FRP box.
$184
Small FRP boxes can hold:
1 Morgan rotator units, plus:
2 Morgan arrestors, or
5 Alpha Delta arrestors, or
5 Polyphaser arrestors.
Recommended conduit size: 1.5”
S
Large 16” tall, x 16” wide, x 8” deep FRP box, includes copper sheet. Gray finish. Add number of grommets in accessories below. Copper sheet measures 14” tall x 14.75” wide. Comes with removable plastic key latch.
16”x16”x8” FRP box.
$356
Large FRP boxes can hold:
2 Morgan rotator units, plus:
4 Morgan arrestors, or
9 Alpha Delta arrestors, or
8 Polyphaser arrestors.
Recommended conduit size: 3”
L
Guardian
series
Masonry mounting kit for mounting an entry panel or junction box to a brick, stucco, or concrete wall. Requires a 1/4” masonry drill bit and (preferably) a hammer drill. Plugs install in a 1.5” deep by 1/4” hole; screws are stainless steel and 1.5” long, perfect for installation in the pre-punched mounting holes in the entry panels and junction boxes.
Price: Masonry mounting kit $4
Price: Screws only, for wood,
siding, etc. $2
Grommet to cable seals. Round foam tubing slides over coax cables and seals cable inside of rubber grommet. Keeps critters and cold air out of your entry panel box.
Price: $.75 ea.
Wire pulling lubricant
makes it easy to install
grommet to cable
seals. 2oz. is just
enough to install two
dozen seals without
having to buy a large container.
Price: $2.95 ea.
OUT OF STOCK
