home        products       ordering        news        contact        gallery        techWelcome.htmlProducts.htmlOrdering.htmlNews.htmlContact.htmlGallery.htmlTech_Resources.htmlshapeimage_1_link_0shapeimage_1_link_1shapeimage_1_link_2shapeimage_1_link_3shapeimage_1_link_4shapeimage_1_link_5shapeimage_1_link_6
 

Don’t forget the hoisting rope to get the wire antenna up there!  Visit our rope page for suitable rope.

HEAVY DUTY ANTENNA MOUNT

NEW! Our new A-frame, heavy duty mounting arm will hold those tall, unwieldy repeater antennas, other large VHF/UHF antennas, as well as small yagis, eggbeater, or satellite antennas (100 pound payload capacity).   Mounting end has a 2” diameter stub mast to accept the 2” U-bolts your antenna was equipped with from the factory. Arm securely bolts to tower legs in four places with our signature clamshell clamps and galvanized bolts.  Large mounting surface spreads the load over a large area and has tremendous clamping force...guaranteed to never slip!  This product was built with climbers in mind, and the installation is the easiest in the industry.  The mounting bolts are fixed in one half of the clamp making installation an easy, one man on the tower project.  The arm also comes with a pulley system for wire antennas.  Two pulleys are used to keep both ends of the rope separated to prevent tangling during use.  The entire unit is hot dipped galvanized for a lifetime of corrosion protection.  Mounting hardware is also hot dip galvanized.  The arm is 3’ long.   Fits all Rohn 20, 25g, or 45g towers, or towers with 1.25” diameter legs only. 



                                                                                                                             Wire antenna standoff arm 

   Upgrade to stainless steel U-bolts, set of three                             

Got my antenna standoff arm from Chris a few months ago, immediately installed on my tower for 75 meter wire.  Easy to install and built very well.  Sure beats hooking to a tree. Pulley in middle and I supplied end pulleys.  Take down and put up wire in 5 minutes.  Going to get one of his entry boxes as soon as the weather breaks.  W3CUB

User Reviews:  What are other hams saying about these products?

*****

*****

                    ANTENNA ARMS

Additional swivel eye pulley with quick link.




Price:  $4.95

User Reviews:  What are other hams saying about these products?
ANTENNA STANDOFF ARM
OPTIONAL ACCESSORIES
Made on a Mac

$60

$12

304 Stainless steel pulley with stainless steel quick link.




Price:  $21.95

WIRE ANTENNA ARMS

The wire antenna arm provide an ideal way to hoist up your inverted vee or other wire antenna.  Arm securely bolts to tower leg with U-bolt and saddle clamps; the saddles are welded to the arms for easy mounting.  Comes with galvanized hardware, quick link, and nylon pulley...you provide the rope and antenna.  Arm comes with two pulleys to keep both ends of the rope separated to prevent tangling during use.  Comes with a hot dipped galvanized finish, just like your tower!  The arm is 3’ long.   Due to the variations in tower models and sizes, please specify tower model and leg diameter when ordering.  Requires 6” of tower leg for mounting.

                                                                                                                                 

Combo Model, wire antenna standoff arm

Upgrade to stainless steel U-bolts, set of five                            

COMBO MODEL, ANTENNA STANDOFF ARM w/mounts for vertical antenna

$75



$20

The combo model antenna arm provides an ideal way to hoist up your inverted vee or other wire antenna as well as having a place to mount a small VHF/UHF type vertical antenna on the end (up to 4 feet tall).  Arm securely bolts to tower leg with U-bolt and saddle clamps; the saddles are welded to the arms for easy mounting.  Comes with galvanized hardware, quick link, and nylon pulley...you provide the rope and antenna.  Now comes with two pulleys to keep both ends of the rope separated to prevent tangling during use. The vertical antenna mounts will fit 1-1.25” diameter antennas and come with 1.25” U-bolts.  The arms have a hot dipped galvanized finish, just like your tower!  The arm is 3’ long.   Due to the variations in tower models and sizes, please specify tower model and leg diameter when ordering.  Requires 8” of tower leg for mounting.



KE7YKS photo

$299



Heavy duty antenna mount

WIRE ANTENNA ARMS

                                                                                                                                 

Stabilizer arm

Upgrade to stainless steel U-bolts and hardware                           

STABILIZER ARM for antenna standoff arms

$34



$10

Beef up your antenna standoff arm by adding a stabilizer arm.  This addition triangulates the mount and prevents the antenna arm from pivoting on the leg.  The pulley system can then be used in other directions besides a straight up/down pull (for example, to pull off one end, horizontally) without fear of the arm pivoting on the leg.  Attaches easily with included hot dip galvanized hardware.  Fits all KF7P Metalwerks standoff arms, past present or future.  The angle/direction of the antenna standoff arm is adjustable in just about any direction around the tower.  Fits all round leg Rohn towers and TOP SECTION ONLY of most crank up towers.

  OUT OF STOCK

  OUT OF STOCK