home        products       ordering        news        contact        gallery        techWelcome.htmlProducts.htmlOrdering.htmlNews.htmlContact.htmlGallery.htmlTech_Resources.htmlshapeimage_1_link_0shapeimage_1_link_1shapeimage_1_link_2shapeimage_1_link_3shapeimage_1_link_4shapeimage_1_link_5shapeimage_1_link_6
 

User Reviews:  What are other hams saying about these products?

User Reviews:  What are other hams saying about these products?
 

Coax ground bus makes grounding your coax shield at the base of a tower or before entrance into a building easy.  Just add a short bulkhead connector into the pre-punched 5/8” diameter holes, attach your coax, and you’re set!  Made from copper, and models with 4, 5 or 6 holes are available.  Does NOT come with bulkhead connectors, but they are available below.  Email me for more information, Chris at KF7P dot com.

 

                                                                                                          

Coax ground bus, 4 hole                                                                                                                        $20

Coax ground bus, 5 hole                                                                                                                        $25

Coax ground bus, 6 hole                                                                                                                        $30

Made on a Mac
                    COAX GROUNDING

Copper wire lug for ground wire, 4-14 gauge, and 2-14 gauge.



4-14 ga., Price:  $4

2-14 ga., Price:  $4.50

Tinned copper ground braid, 1/2” wide and 3/4” wide.

(Specify number of feet after adding to cart).



1/2’ braid, Price:  $.85/ft.

3/4” braid, Price: $1.50/ft.

Copper split bolt for connecting two 4 gauge copper ground wires.



Price:  $2.50

Penetrox-A anti-oxidant connection grease.  For all aluminum to aluminum and aluminum to copper connections.  Prevents oxidation, corrosion and improves conductivity between arrestors and copper (or aluminum) sheet. 

2 oz.,    Price:  $4.95

8 oz.,    Price:  $12.95

Bulkhead adaptors, used with coax bus above.  Body is nickel plated, insulator is Delrin, and center pin is nickel plated.  Comes with two nuts.             

UHF, Price:  $4.50


N, Price: $6.00

Optional Accessories
Coax Ground Bus

New! 

Terminal strip for rotor/control wire connections, 8 double terminals.



Price:  $4

All of the products that I have purchased from you have been top notch! Great quality and they have all been installed and used for over a year now and are holding up great!!!! Thanks for the great products!!!!!

-Mike, KD0BKC

*****

*****

Weighing in at 3/4 of a pound, this heavy duty version of the coax bus can handle abuse from heavy coax runs without breaking a sweat!  Formed from nearly tenth-inch thick solid copper sheet, it has a sturdy tee base with four mounting holes to stay put.  Extra thick copper provides rigidity and won’t deform under the weight of heavy coax runs.  Comes with a brass stud and two wingnuts for attachment of your ground wire(s).  Can be used indoors or outdoors (be sure to properly weatherproof all connectors).  installation is easy...just add a short bulkhead connector into the pre-punched 5/8” diameter holes, attach your coax, and you’re set!  Does NOT come with bulkhead connectors, but they are available below.  Email me for more information, Chris at KF7P dot com.

                                                                                                          

HD Coax ground bus, 4 hole                                                                                                                        $45

HEAVY DUTY Coax Ground Bus

The perfect clean and neat (and safe!) completion to my ham shack.

-Rick, KM4OKV

*****

*****

Ground Bus Wall Mount (GBWM)


Alpha Delta ground bus wall mount

Copper Ground Bus Wall Mount is a very rugged device for mounting up to 4 Alpha Delta Model TT/ATT3G50 series broadband coax surge protectors. Heavy gauge (.0937, 13 ga.) copper prevents twisting or flexing from the weight of long coax cable runs. Comes with copper bar, two copper ground lugs for #4-14 size wire with stainless mounting hardware, and  two ring terminals with stainless mounting hardware.  User supplies own wall mounting screws or anchors.  Alpha Delta surge units attach with stud mounts supplied in original packaging.



$60

Now there is an easier way to mount those bulkhead style Polyphaser IS-B50 arrestors.  Made of heavy tenth-inch thick solid copper, our mounting bus can come in 4 to 12 hole configuration. Angled base has mounting holes for attaching to any flat surface, conductive or non-conductive.    Extra thick copper provides rigidity and won’t deform under the weight of heavy coax runs.   Can be used indoors or outdoors (be sure to properly weatherproof all connectors). Can be mounted in one of our Entry Panels or Junction boxes.

                                                                                                          

Polyphaser mounting bus, 4 hole                                                                                                              $40

Polyphaser mounting bus, 6 hole                                                                                                              $48

Polyphaser mounting bus, 8 hole                                                                                                              $56

Polyphaser mounting bus, 10 hole                                                                                                            $64

Polyphaser mounting bus, 12 hole                                                                                                            $72

Polyphaser Mounting Bus

NEW!!