KF7P heavy metal
 
 
Get a set of these slick bolt-on arms to protect your expensive coax cables!
 
Coax Standoff Arms for Telescoping Towers
Coax Standoff Arms:  Made from steel and painted with enamel to match your tower.  The hoops are cold rolled steel, and allow easy passage of your coax and control cables without disconnecting them!  Custom U-bolts allow easy connection to tower sections.  The top “pork chop” arm allows a gradual radius for coax and other cables preventing kinks.  Cables are easily held with several UV resistant cable ties.
 
These coax standoff arms allow your cables to form a neat pile at the base of the tower when fully nested.  If you don’t see your tower listed below, please ask!  I can build arms for any tower.
 
This set is for a Force12 Low Profile Tower 12-42, painted to match the Force 12 powder coating.
Features:
  1. ‣All steel, welded construction.
 
 
  1. ‣Bolt on assembly.  No drilling for most towers.
 
 
  1. ‣Cables do not need to be removed.
 
 
  1. ‣Stainless steel or zinc plated hardware.
 
 
  1. ‣Top arm has gradual radius to take weight of cables. No slipping or kinking of cables.
 
 
  1. ‣Primed with self-etching primer, then painted to match tower; galvanizing extra.
 
 
 
 
Telex HG52SS  (HyGain)                                                 $30/arm
 
Set of three arms for HyGain HG52SS towers.  Arms bolt to tower legs with    zinc plated U-bolts (included).  Does not require unscrewing either end of coax or other cables.  Two stage gray enamel paint finish.  Shipping weight:  8.5 lbs (??)
 
 
 
 
Force12  LPT 12-42                                                         $30/arm
 
Set of four arms for Force12 Low Profile Towers.  Arms attach with large U-bolts, top arm attaches to rotor mounting plate with stainless bolts.  Drillng a 1/4” hole it top plate is required.  Does not require unscrewing either end of coax or other cables.  Two stage green enamel paint to match green towers.  Other Force12 versions coming soon...email me for details.  Shipping weight:
 
 
 
 
Tristao/USTower  50’                                                     $25/arm
 
Set of three arms for Tristao/USTower 50’ towers.  Arms attach to section cross bracing/channel, and requires drilling a 1/4” hole.  Stainless bolts included.  Does not require unscrewing either end of coax or other cables.  Two stage gray enamel paint.  Shipping weight:
 
 
 
 
Tri-Ex Towers     LM series                                           $30/arm
 
Set pictured is for LM470.  This set utilizes different U-shaped mounting collars set with a 5/16” bolt.  Does not require unscrewing either end of coax or other cables.  Shipping weight: 12 lbs. /4 arms.
 
 
 
 
USTower MA- tubular series                                        $30/arm
 
Coming soon!
 
 
 
 
Models:
AB-577 Mast                                 $35/top arm, $30/guide arms
 
Arms for the famous surplus military AB-577 mast.  Massive 3/8” U-bolts for positive clamping.  Does not require unscrewing either end of coax or other cables.  Shipping weight: 9 lbs. /two arms.
 
 
 
 
Telex HG54  (HyGain)                                                      $30/arm
 
Set of three arms for HyGain HG54 heavy duty version.  Arms bolt to tower legs with zinc plated U-bolts (included).  Lowest guide arm has larger U-bolt for this HD tower.  Does not require unscrewing either end of coax or other cables.  Two stage gray enamel paint finish.  Shipping weight: